ADAM Audio Sub10 PRO — Active Subwoofer for Professional Monitoring

The ADAM Audio Sub10 PRO is an advanced active subwoofer designed for professional recording studios, post-production facilities, and multi-channel monitoring systems. It combines advanced digital signal processing (DSP), powerful low-frequency reproduction, and network calibration, providing a comprehensive solution for any monitoring system—from 2.1 configurations to immersive and full-range setups.

Product Features

• 10-inch large-excursion bass driver with a fiber-reinforced paper cone
• Class D (PWM) amplifier delivering 200 W RMS / 325 W Peak power
• AES3 digital connectivity and network calibration based on the AES70 protocol
• Integration with Sonarworks SoundID Reference for automatic room correction
• 4-band parametric EQ available via the ADAM Control software
• Three operating modes: Stereo, LFE, and Wide
• FEA-optimized port using finite element analysis
• Footswitch input for bass management bypass
• Solid wooden enclosure with a protective metal grille

Professional Low-Frequency Capabilities

The Sub10 PRO is engineered to deliver accurate, distortion-free low-frequency reproduction. The large-excursion driver, mounted in a front-firing enclosure with an FEA-optimized front bass port, delivers impressive sound pressure levels while maintaining low harmonic distortion. Maximum SPL reaches 110 dB (50–100 Hz, 3% THD) and 114 dB SPL in bass management configuration—making this subwoofer ideally suited for demanding studio applications.

The wide frequency range from 22 Hz to 264 Hz (-3 dB) ensures full coverage of the sub-bass spectrum, whether you are working on electronic music mixes, film soundtracks, or radio productions. Precise crossover settings (70, 85, 100, and 115 Hz) allow the subwoofer to be perfectly matched to any studio monitors, ensuring a seamless transition between low and mid-frequency bands.

The built-in DSP offers advanced features, including a 4-band parametric EQ accessible through the ADAM Control software (available for Windows and MacOS), enabling manual calibration of the frequency response to specific acoustic conditions. Thanks to integration with Sonarworks SoundID Reference, automatic room correction profiles can be deployed, significantly improving playback fidelity in acoustically imperfect rooms.

Connectivity is highly versatile: dual analog XLR/TRS combo inputs, XLR AES3 digital input, analog XLR outputs, and AES3 digital output. A built-in 24-bit analog-to-digital converter and an internal sample rate of 96 kHz ensure the highest signal quality. A delay range of 0 to 10 ms (32-bit resolution) allows precise synchronization of the subwoofer with main monitors. Input sensitivity, level adjustment from -18 dB to +6 dB, and eight-phase settings provide full control over system integration.

Three operating modes—Stereo, LFE (below 120 Hz), and Wide—allow flexible subwoofer configuration depending on the application. The Remote Control mode enables remote operation, while the footswitch-activated bypass (not included) allows instant comparison of sound with and without the subwoofer, an invaluable tool during mixing.

Applications

• Stereo monitoring systems in recording studios and post-production facilities
• Multi-channel monitoring systems (5.1, 7.1, 9.1)
• Immersive and spatial applications (Dolby Atmos, DTS:X, Ambisonics)
• Full-range audio systems
• Conventional 2.1 configurations
• Film and television post-production
• Music mixing and mastering

Technical Specifications

• Enclosure design: Front-firing with front bass port
• Driver diameter: 10 inches
• Voice coil diameter: 45 mm (1 3/4")
• Cone material: Fiber-reinforced paper
• Amplifier type: PWM (Class D)
• RMS Power: 200 W (1% THD, 3 Ohm)
• Peak Power: 325 W (10% THD)
• Frequency range (-3 dB): 22 – 264 Hz
• Frequency range (-6 dB): 21 – 300 Hz
• Crossover frequencies: 70, 85, 100, 115 Hz (variable in ADAM Control)
• Max SPL (50–100 Hz, 3% THD): 110 dB SPL
• Max SPL (25–50 Hz, 10% THD): 105 dB SPL
• Max SPL (IEC weighted noise, full range): 113 dB SPL
• Max SPL (IEC weighted noise, 85 Hz with bass management): 114 dB SPL
• Operating modes: Remote Control, Local/Stereo, LFE (<120 Hz), Wide
• Phase adjustment: 0°, -45°, -90°, 135°, 180°, -225°, -270°, -315°
• Bass management: 70, 85, 100, 115 Hz
• Bypass: Yes, via footswitch (not included) and TRS connection
• Analog inputs: 2 × XLR/TRS combo
• Digital input: XLR AES3
• Analog input impedance: 25 kOhm
• Digital input impedance: 110 Ohm
• Maximum input level: +19 dBu
• Analog outputs: 2 × XLR
• Digital outputs: XLR AES3
• ADC converter: 24-bit (XLR/TRS inputs)
• Internal sample rate: 96 kHz
• Delay range: 0 – 10 ms, 32-bit resolution
• Input sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB, full space
• Level adjustment: -18 dB to +6 dB
• Input selector: Analog, Digital
• EQ: 4-band parametric (QEQ) in ADAM Control
• Calibration compatibility: Sonarworks SoundID Reference
• Network protocol: AES70 / TCP
• Network connector: RJ45
• Control software: ADAM Control (Windows, MacOS)
• Power consumption (max / standby): 450 W / 2.5 W
• Supply voltage: 100 – 240 V, 50/60 Hz
• Power class: 450 W max
• Operating conditions: -10°C to +40°C, humidity <75% non-condensing
• Dimensions (H × W × D): 450 × 360 × 450 mm
• Weight: 22.8 kg

Materials and Construction

The Sub10 PRO enclosure is made of MDF covered in vinyl, with a painted MDF front panel. The solid wooden construction ensures rigidity and dampens unwanted resonances, while the protective metal grille on the front safeguards the driver from mechanical damage. The bass driver cone is made of fiber-reinforced paper—a material that combines lightness with durability, ensuring precise and dynamic low-frequency reproduction. The entire unit weighs 22.8 kg, reflecting a solid, studio-grade build quality.

Package Contents

• ADAM Audio Sub10 PRO Subwoofer
• Power cable
• Quick Start Guide

Summary

The ADAM Audio Sub10 PRO is a subwoofer that combines advanced DSP technology, a powerful Class D amplifier, and extensive digital connectivity in one solid enclosure. Thanks to network calibration, integration with Sonarworks SoundID Reference, and precise crossover and phase settings, it enables accurate, controlled bass reproduction in any studio configuration—from classic 2.1 to immersive multi-channel systems. If you are looking for a subwoofer that provides professional calibration tools and reliable low-frequency reproduction, the Sub10 PRO is the choice that will meet the most demanding expectations.