You have no items in your shopping cart.
Tascam DR-10CH - digital recorder
Tascam DR-10CH - digital recorder
Product available: 5 pcs
Main warehouse
Stationary shop
EUR292.58
Product attributes
Model :
DR-10CH
SKU :
SUP_nj19519
Warranty :
2 years
Manufacturer :
Tascam
Type :
Portable Recorders
Integrated stereo microphone :
NO
Recording Tracks :
1
Microphone Inputs :
1
48 V phantom power :
NO
Storage medium :
Micro SD/SDHC
Headphone connection :
YES
Integrated speaker :
NO
Limiter :
YES
USB connection :
YES
Product Description
Details
Tascam DR-10CH
The DR-10C series recorders are connected to tie-bar microphones, thus creating a compact recording system. The DR-10CS is designed to work with Sennheiser microphones. An optional kit for Sony / Rams microphones (AK-DR10CR) is available.
DR-10C are equipped with inputs and outputs, so they can work independently or in combination with wireless transmitters. If a transmitter is used, the recorder acts as a backup device, protecting against wireless signal loss during recording. In the case of lectures or services, the DR-10C allows you to record the entire content before it goes to the sound system. Also during events such as weddings or reality shows, the DR-10C can act as a compact system that records sound from personal microphones.
The lightweight DR-10C can run for up to four hours on a single AAA battery. The recording is made on a standard microSD memory card. Registration features include automatic gain control and a high-pass filter. The operation of the Dual Recording function is based on the parallel recording of the safety path, with a lower level, which means that in the event of an overdrive of the main path, a distortion-free backup path is available.
Working as a backup recorder, connected between the wireless microphone and the transmitter
The DR-10C recorder can be connected between a microphone and a wireless system transmitter of a supported brand. Connect the microphone to the recorder and the latter, using the cable included in the set, to the transmitter. It is a perfect configuration for using the DR-10C as a backup recorder - guaranteeing that the recorded sound, transmitted wirelessly, will not be interrupted.
Support for wireless systems from several manufacturers
The selection includes systems manufactured by several manufacturers. Standard models work with Sennheiser and Shure wireless systems. In addition, Sony and RAMSA systems can be used, but this requires the installation of optional panels with the appropriate connectors.
Note: The Sony / RAMSA panel is equipped with a slide switch that allows the correct configuration of the connection.
Compact and lightweight
The DR-10C is a compact device - it weighs only 51 grams in a hand. Moreover, it is designed so that it can be carried with the transmitter as one device. To attach to the transmitter, you can use the attached silicone tape and a durable strap holder - this gives a number of ways of use, depending on the situation.
Use it as a compact, portable PCM recorder
DR-10C can be used in situations where the performer or the speaker may be outside the range of the wireless system. When not used with a wireless system, the DR-10C, in combination with a tie-clip microphone, is the ideal recorder for stand-alone use, compact and easy to carry.
Designed with the reliability of field recording in mind
It often happens that there is only one occasion to register a given event. This recorder is equipped with functions to prevent potential problems that could arise from incorrect setting of the recording level - including the parallel recording function that allows you to set the highest possible recording level, while simultaneously recording a backup track with a lower level. In addition, the recorder has an automatic gain control that adjusts the input level to the volume of the source audio. Additionally, a limiter function is available.
Slip write switch and hold function prevent accidental actions during recording
A number of solutions, including the parallel recording function, which works by saving the safety path, with a lower level
Locking files before the battery is fully discharged prevents the loss of saved data
Built-in clock and BWF file support (time information is saved in metadata)
Record control function and headphone output allow you to monitor the recorded material
Possibility of data transfer between DR-10C recorders
The infrared transmission function allows you to easily transfer settings from one DR-10C to the next. This function can be used when several recorders are used and the necessary settings have already been made in one of them.
Properties:
- Linear PCM micro recorder for lavalier microphones
- Possibility to connect between the microphone and the wireless transmitter as a backup recorder
- Record mono BWF files with a sampling frequency of 48 kHz and 24-bit resolution
- Storage on microSD / microSDHC cards (up to 32 GB)
- Parallel write function allows you to simultaneously record two files with different levels, one of which is a safety file, in case of clipping
- The Hold function prevents accidental shutdown of the recorder while recording
- Enable limiter to prevent clipping
- Switchable high-pass filter to reduce low-frequency noise
- Automatic gain control function
- Time Track incremental function enabling the saving of a new file after a specified period of time (on / off)
- Playback function that allows you to listen to the recording using headphones
- Headphone output
- Built-in clock for recording time information with recordings
- OLED display with excellent readability
- Micro USB-B connector for easy data transfer to a computer
- Powered by one AAA or USB battery
- Over eight hours of operation with one AAA battery
- Ability to define settings in a text file on a computer and copy to DR-10C via USB
- Infrared transmission allows you to transfer information about settings to other DR-10C recorders
- The ability to update the firmware using a microSD card
- DR-10CS compatible with Sennheiser microphones, optional Sony / Rams adapter available (AK-DR10CR)
Specification:
General:
MicroSD card recording media (64 MB - 2 GB)
microSDHC card (4–32 GB)
Playable and Recorded formats Mono WAV files (BWF format), 48 kHz, 24 bit
Entrances and exits
Analog Input (Mic) DR-10CS (for Sennheiser): 3.5mm mini TRS jack (with protection) DR-10CH (for Shure): 4-pin mini XLR male
Maximum input level –12 dBV
Minimum input level –53 dBV
Mic input gain 10 dB to 35 dB (depending on MODEL SELECT setting)
Input impedance of 33 kΩ or greater
Analog output (for transmitter) DR-10CS (for Sennheiser): 3.5 mm mini TRS jack (with protection)
DR-10CH (for Shure): 4-pin mini XLR male
Analog output (headphone jack) 3.5mm mini stereo jack (dual mono audio output)
Audio parameters, from input to headphone output
Frequency response 20 Hz - 22 kHz, + 1 / -3 dB
Distortion 0.05% (1kHz sine wave, maximum input level)
S / N Ratio 88dB or higher (max.PHONES level, MIC GAIN set to LO)
Computer requirements
Supported operating systems Windows 7, Windows 8 (including 8.1) OS X Mavericks (10.9) OS X Mountain Lion (10.8)
Power and other parameters
Power supply 1 AAA battery (alkaline, NiMH or lithium)
USB from a computer
Power consumption 0.45 W (maximum)
Current consumption (USB powered) 0.25A (maximum)
Date and time recording Internal lithium battery (built-in)
Dimensions (W x H x D) 52 x 56 x 25 mm (without relief)
Weight 63 g (with battery)
51 g (without batteries)
The range of permissible operating ambient temperatures is 0-40 ° C
Shipment
Product delivery details Tascam DR-10CH - digital recorder
Shipment from Warsaw, Poland.
Delivery to
If you wish to see more accurate shipping methods available in your location, fill the fields above.
Ask question
Ask question about product
Negotiate price
