RODE Broadcaster
HF2 1” capsule with gold plated diaphragm
On-Air indicator LED
Ultra-low noise
Voice tailored low-cut feature
Internal pop-filter
The RØDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.
Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
Broadcaster Specifications
Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 1.00"
Polar Pattern Cardioid
Address Type End
Frequency Range 20Hz - 20kHz
Output Impedance 40Ω
Maximum SPL 128dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 2.0mV
Sensitivity -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 14dB-A
Power Options +24V phantom power+48V phantom power
Weight 577.00gm
Dimensions 167.00mmH x 50.00mmW x 65.00mmD
Output XLR Output
PSA1
Professional Studio Arm
The PSA1 is a professional studio boom arm that allows easy and precise placement of a microphone. It features an innovative parallelogram design that keeps the mic direction constant as the height is adjusted, as well as internal springs for quiet operation.
Key Features:
Professional studio arm
Ideal for radio, broadcast, studio, and home use
Internal springs for quiet operation
Includes both threaded desk insert and desk mount clamp
Supported microphone and shockmount/clip weight between 700g to 1.1kg
Specifications
Mechanical Specifications
Thread Size :3/8"
Weight (g) : 1740
Horizontal Reach (mm) : 820
Vertical Reach (mm) : 840
Minimum Weight Supported (g) : 700
Maximum Weight Supported (g) : 1100
RH SOUND HSMA-201 DOUBLE POP FILTER
A well-made dual pop filter for the 15.5 cm microphone with a gooseneck and vise mount, so the cover fits on any microphone stand.
3 METERS XLR- XLR CABLE
Studio quality XLR mic cable for connecting mics to mixers, preamplifiers, audio interfaces and recorders and more. The cable is both quiet and durable. It is perfect for recording and transmitting sound in any situation. The cable is sure to provide maximum signal transfer and minimum loss thanks to its heavy-duty construction, internal and external shielding, and heavy-duty copper conductors.
Characteristics:
- Double external copper screens and double internal screens
- Professional connector ensures perfect signal integrity
- Durable PVC cover withstands harsh conditions of use
- All soldering points are wrapped in foil for protection
- Length: 3 meters