Adam A5X Pair + SUB7 – Pair of monitors + SUB7

The A5X is popular among professionals working in television studios and remote broadcast vans. The A5X can also be found in numerous home/project studios around the world. Its open, powerful sound makes the A5X a trustworthy and useful tool for multimedia applications as well.

Like all models of the AX-Series, the A5X is equipped with ADAM‘s proprietary X-ART tweeter. One 5.5“ bass/midrange woofer works below 2.5kHz and is driven by a 1.5“ voice coil and a powerful 50 Watt PWM amplifier. Its acoustic qualities give you a clear picture of the smallest changes in your mix and the sonic results. Despite all that it does, the A5X is not fatiguing in long studio sessions.

Stereolink

The ‘Stereolink’ is a useful feature for desktop DAWs. Two additional input and output jacks for the second stereo channel allow you to control the volume for both monitors using the volume control of only one loudspeaker. The volume control of the other monitor only affects its own volume in order to easily compensate for differences in listening distance. Unlike the typical master-slave configuration, each A5X monitor is fully equipped and can function either as a master or a slave unit.

"On the desktop the A5X has made a superb impression. In comparison to other desktop monitors, no one was able to get close to this level." (Stereo)

Technical data:

Mid-Woofer

• Number 1
  
• Basket Ø 5.5" (145 mm)
  
• Voice coil Ø 1.5" (32 mm)
  
• Cone material Carbon/Rohacell/Glass Fiber
  
• Tweeter
  
• Number 1
  
• Type X-ART
  
• Diaphragm area 4 inch² (2420 mm²)
  
• Equiv. Diaphragm Ø 2" (56 mm)
  
• Velocity transform ratio 4:1
  
• Diaphragm weight 0.17 g
  
• Built-in Amplifiers
  
• Mid-Woofer 1
  
• Type PWM
  
• Amp. power RMS / music 50 W / 75 W
  
• Tweeter 1
  
• Type A/B
  
• Amp. power RMS / music 50 W / 75 W
  
• Control panel
  
• Input Sensitivity -∞ to +14 dB
  
• High Shelf EQ > 5 kHz ±6 dB
  
• Low Shelf EQ < 300 Hz ±6 dB
  
• Tweeter gain ±4 dB
  
• Input connectors
  
• Analog XLR / RCA
  
• General data
  
• Frequency response 50 Hz - 50 kHz
  
• THD 90dB/1m > 100 Hz ≤0.6 %
  
• Max SPL with sine wave acoustic 100Hz to 3kHz at 1m ≥102 dB
  
• Max SPL per pair at 1m ≥110 dB
  
• Crossover frequencies 2500 Hz
  
• Input impedance 30 KOhm
  
• Weight 14.6 lb (6,6 kg)
  
• Magnetically shielded No
  
• Height x Width x Depth 11" (280 mm) x 6.5" (170 mm) x 8.5" (220 mm)
  
• Delivery contents Cinch-cable, Power cord, Manual
  

ADAM Audio subwoofers are designed with one primary goal in mind: Achieving absolute accuracy and an authentic natural sound in the process of music reproduction. This means combining exceptional bass power with precision and clarity in every subwoofer. These elements are the perfect partners to complement the highly acclaimed clarity and transparency of ADAM monitors in the lower and lowest frequencies.

All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.

Panel / Controls

All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and a variable upper frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theater sound and also to relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous').

Sub7

The Sub7 has been designed to complement smaller monitors such as the AX-Series. Its small footprint allows for easy placement, even in small environments. The included remote control facilitates volume changes or crossover frequency adjustments from your favorite listening position.

The Sub7 is equipped with both balanced (XLR) and unbalanced (RCA) input and output connectors, allowing the Sub7 to be used in home or studio environments. Numerous control options allow for many and varied adjustments to room acoustics or the satellites used.

The low cutoff frequency of 32Hz (-3dB) enables this subwoofer to reproduce even the lowest frequencies with accuracy and realism.

Technical data:

Subwoofer

• Number 1
  
• Basket Ø 7" (178 mm)
  
• Voice coil Ø 1.5" (38 mm)
  
• Cone material Paper
  
• Built-in Amplifiers
  
• Subwoofer 1
  
• Amp. power RMS / music 140 W / 210 W
  
• Control panel
  
• EQ 80 Hz -60 to +6 dB
  
• Input connectors
  
• Analog XLR / RCA
  
• General data
  
• Panel Front
  
• Frequency response 32 Hz - 150 Hz
  
• THD > 60 Hz ≤1 %
  
• Peak SPL max at 1m ≥107 dB
  
• Crossover frequencies 50 - 150 Hz
  
• Input impedance 10 KOhm
  
• Weight 17.6 lb (8 kg)
  
• Height x Width x Depth 14.5" (370 mm) x 8" (200 mm) x 11" (280 mm)
  
• Delivery contents Remote control, Batteries (3 x AAA), Power cord, Manual